by Jet
(5)Buy new:
5 used & new from $999.00
(Visit the Best Sellers in Drill Presses list for authoritative information on this product's current rank.)
Review & Description
Floor drill press has a 1in. drilling capacity, a 1 1/2 HP, single-phase 115/230V motor and a hinged metal belt and pulley cover coupled with quick adjustment motor mount allow rapid changing of spindle speeds. Features adjustable tension spindle return spring and built-in work lamp (bulb not included). HP: 1 1/2, Volts: 115 / 230, Speeds (qty.): 12, Drilling Capacity (in.): 20, Chuck Size (in.): 3/4, Dimensions L x W x H (in.): 19 x 33 x 67Tons of power and Jet's renowned accuracy make this a great choice for the professional as well as the choosy home woodworker. The smooth-traveling table raises and lowers at the turn of a crank to exactly where you need it; the 3/4-inch chuck rides smoothly up and down. Angled drilling is no problem, because the rock-solid large worktable tilts to 45 degrees. The table is round, and that has its advantages, but it does give you a little less room for clamping. When it's time to change drill speed to any of the 12 speeds ranging from 150 to 4,200 rpm, just flip open the hinged metal cover, disengage the motor, slip the belt onto the right pulley and you're back at work in a flash. Our favorite feature on this nice machine is the built-in worklight, something we think every manufacturer should incorporate. --Kris Jensen-Van Heste
A great choice for professionals as well as for home woodworkers, the Jet 354170 JDP-20MF 20-inch floor drill press spins bits up to 3/4 of an inch with 12 speeds from 150 to 4,200 rpm. It's equipped with a built-in work lamp, adjustable tension spindle return spring, and hinged metal belt and pully cover. A drill chuck and key are included, and it's backed by a two-year limited warranty.
|
Features
The Jet 354170's smooth-traveling table raises and lowers at the turn of a crank to exactly where you need it. And angled drilling is easy thanks to the rotating, 45-degree tilting worktable that also features a quick-release clamp. The 1-1/2-horsepower motor can run off either 115-volt outlets (for which it comes prewired) or 230-volt sources, and it provides 12 drill speeds ranging from 150 to 4,200 rpm. To change the speed, just flip open the hinged metal cover, disengage the motor, slip the belt onto the right pulley, and you're back at work in a flash.
The 354170 has a 1/2-inch diameter external positive depth stop with three-nut locking feature for quick adjustment. It also offers an adjustable tension spindle return spring, with the spindle supported by high-quality ball bearings. Other features include an on/off switch located on front of the drill press head and a built-in work lamp (bulb not included).
What's in the Box
One Jet 354170 JDP-20MF drill press (head assembly, table, column and table bracket assembly, base), chuck and key, arbor, drift key, and operating and assembly instructions.
Specifications
|  |
Read more
No comments:
Post a Comment